Rolling Machine >High Production series
 
2-Roll Auto Bending Rolls
 
 
2-roll plate bending roll is designed to prebend and roll the plate into a completed cylinder in one pass, and in a very short cycle time.The machine consists of 2 rolls; a fixed top roll and a moveable lower roll.The top roll made of carbon steel with cladding, and the lower roll made of carbon steel and cover with urethane outside.Hydraulically powered both top and lower rolls, with using correct size of the top roll for rolling diameter, the cylinder can be done in just one pass and get very perfect prebending on the head and tail edge. LED readout for showing the position of the lower roll and PLC electric system with push buttons for all controls make the operation to be more simple and convenient. The working capacity range is suitable from 0.3mm - 4mm thickness by 600mm - 1500mm width.
 
Air 4-Roll Auto Rolls
 
 
 
The Air 4-Roll Auto Rolls machine is designed to prebend and roll the plate into a completed cylinder in one pass, and in a very short cycle time! All rolls are journalled in bearings, hardened and ground. The top and lower rolls are driven by an efficiency motor. Air system comes with clean and quite feature provides power to all roll movements as well as the drop end for easy removal of the finished cylinder. Controls all by pushbuttons provide manual and auto run mode for setting and production. LED readouts provide fast and easy positioning the side rolls for reducing setting time.
 
Model
Capacity
mm
Roll dia.
mm
Motor
hp
Weight
kg
Sizes
mm
LPF-2412
2.5 x 610
106 / 85
2
720
1810 x 1450 x 1400
LPF-4416
1.5 x 1270
106 / 85
2
970
2410 x 1450 x 1400
LPF-5420
1.0 x 1550
106 / 85
2
1100
2710 x 1450 x 1400
 
E-Mail : lemas@lemas.com.tw - Tel : 886-5-272-1188, 278-1777 - Fax : 886-5-272-1177, 278-4120
LIEN HSIEN MACHINERY CORPORATION
Copyright@2005 Tawin National Net All rights reserved